Bhosari, Pune, Maharashtra GST No. 27AAFFE0214K1ZQ

Call 07942618263 89% Response Rate

Send Email

Home
»
Our Products
»
THK Ballscrew

THK Ballscrew

We Excellent Industrial Products are one of the leading Supplier of Ballscrews. Our Brands are THK, Hiwin,Misumi etc. for more info please call 8799869602

THK Precision Ball Screw BIF

Product Price: Rs 300 / PieceGet Best Price

Product Brochure

Product Details:

Material	Stainless Steel
Brand	THK Japan
Model	BIF 1604V-5 , BIF 2010V-5 etc
Outer Dimeter	36 mm - 62 mm
Uses/Application	Industrial

he overall length of the nut will increase when equipping the QZ lubricating device.

[Precaution on Selection] Make sure the stroke length exceeds the total length of the screw shaft with the QZ Lubricator attached. [Handling]
Take care not to drop or strike the product, which could result in injury or damage. Keep air holes clear of grease or other obstructions. The QZ Lubricator lubricates the raceway only, so it must be used in combination with regular greasing or lubrication.

Get Best QuoteRequest A Callback

THK Precision Ball Screw BNF

Product Price: Rs 340 / PieceGet Best Price

Product Brochure

Product Details:

Material	Stainless Steel
Brand	THK Japan
Outer Dimensions	102 mm - 122 mm
Uses	Industrial
Screw shaft outer diameter	55 mm - 63 mm

The simplest type with a single ball screw nut. It is designed to be mounted using the bolt holes drilled on the fl ange.

Get Best QuoteRequest A Callback

THK Precision Ball Screw DK

Product Price: Rs 450 / PieceGet Best Price

Product Brochure

Product Details:

Material	Stainless Steel
Brand	THK-Japan
Usage/Application	Industrial
Outer diameter	26 mm - 40 mm
all center-to- center diameter	14.5 mm - 26 mm

The most compact type, with a ball screw nut diameter 70 to 80% of that of the return-pipe nut.

Get Best QuoteRequest A Callback

THK Precision Rotary Ball Screw BLR

Product Price: Rs 400 / PieceGet Best Price

Product Brochure

Product Details:

Material	Stainless Steel
Brand	THK-Japan
Usage/Application	Industrial
Model	BLR 1616 , BLR 2020
Outer diameter	52 0 -0.007 mm - 20 0 -0.008 mm

The accuracy of model BLR is compliant with a the JIS standard (JIS B 1192-1997) except for the radial runout of the circumference of the ball screw nut from the screw axis (D) and the perpendicularity of the fl ange-mounting surface against the screw axis (C).

Get Best QuoteRequest A Callback

THK Rolled Ball Screw WTF

Product Price: Rs 500 / PieceGet Best Price

Product Brochure

Product Details:

Material	Stainless Steel
Brand	THK-Japan
With/without oil hole	yes
Standard seal	ZZ
Threading Direction	Right-hand
Standard grease	AFB-LF
Types of Nuts	Singla Nut

Using an end-cap method, these models achieve stable motion in high-speed rotation.A. Screw shaft outer diameter. Lead. Model No. Ball center-to- center diameter. Thread minor diameter. No. of loaded circuits.

Get Best QuoteRequest A Callback

THK Ball Screw EPB

Product Price: Rs 400 / PieceGet Best Price

Product Brochure

Product Details:

Material	Stainless Steel
Brand	THK-Japan
Model	EPB 1605V-6 , EPB 2004V-8 , EPB
Outer mass diameter	28 - 56
Basic load rating	9.3 kN - 64.8 kN

The rigidity values in the table represent spring constants each obtained from the load and the elastic deformation when providing a preload 8% of the basic dynamic load rating (Ca) and applying an axial load three times greater than the preload. These values do not include the rigidity of the components related to mounting the nut. Therefore, it is normally appropriate to regard roughly 80% of the value in the table as the actual value. If the applied preload (Fa0) is not 0.08 Ca, the rigidity value (K N) is obtained from the following equation.

Get Best QuoteRequest A Callback

THK Precision Caged Ball Screw SBN

Product Price: Rs 500 / PieceGet Best Price

Product Brochure

Product Details:

Material	Stainless Steel
Brand	THK-Japan
Model	SBN 1604-5 , SBN 1605-5 , SBN 2004-5
crew shaft outer diameter	16 - 45
Ball center-to- center diamete	16.5 - 47

With model SBN, the raising of both ends of the thread groove is not available. When designing your system this way, contact THK.

Get Best QuoteRequest A Callback

THK Precision Caged Ball Screw SDA

Product Price: Rs 400 / PieceGet Best Price

Product Brochure

Product Details:

Material	Stainless Steel
Brand	THK-Japan
Screw shaft outer diameter	10 mm - 20 mm
Ball center-to- center diameter	10. 4 mm - 20.75 mm
Uses	Industrial

Note 1: The maximum permissible rotation speed is calculated from the DN value. Calculate the critical speed, and then select the lower value. Note 2: Each rigidity value (K) in the table indicates the spring constant obtained from the load and the elastic deformation when an axial load at 30% of the basic dynamic load rating (Ca) is applied.

Get Best QuoteRequest A Callback

THK Ball Screw EBA

Product Price: Rs 500 / PieceGet Best Price

Product Brochure

Product Details:

Brand	THK-Japan
Screw shaft outer diameter	16 - 63
Thread minor diameter	13.1 -56.0
Usage/Application	Industrial
Ball Diameter	3.175 - 9.525
Model No	EBA 1605-4 , EBA 2005-3

In the DIN standard compliant Ball Screw, balls under a load roll in the raceway cut between the screw shaft and the nut while receiving the axial load, travel along the groove of a defl ector embedded inside the nut to the adjacent raceway, and then circulate back to the loaded area. Thus, the balls perform infi nite rolling motion. Two types of nuts are available: model EB of oversized-ball preload type or non-preloaded type, and model EP of off set preloaded type.

Get Best QuoteRequest A Callback

THK Precision Ball Screw R20-5-500

Product Price: Rs 12,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Size	25 mm
Material	Carbon Steel
Packaging Type	BOX
Quantity Per Pack	1
Brand	THKJAPAN
Type	PRECISION BALL SCREW
Bore Size	20MM

For THK Precision Ball Screws, a wide array of precision-ground screw shafts and ball screw nuts are available as standard to meet diversifi ed applications.Ballscrews are the most common type of screws used in industrial machinery and precision machines.

Additional Information:

Item Code: R20-5-500MM
Production Capacity: 0
Delivery Time: 2-3 DAYS
Packaging Details: We will pack with wrapping bubble paper and box packing

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

View Complete Range >

Thank youYour Enquiry has been sent successfully.

THK Ballscrew

THK Precision Ball Screw BIF

THK Precision Ball Screw BNF

THK Precision Ball Screw DK

THK Precision Rotary Ball Screw BLR

THK Rolled Ball Screw WTF

THK Ball Screw EPB

THK Precision Caged Ball Screw SBN

THK Precision Caged Ball Screw SDA

THK Ball Screw EBA

THK Precision Ball Screw R20-5-500

EXPLORE MORE CATEGORIES

THK Linear Guideways

Industrial Bearings

Linear Guideway

Hard Chrome Plated Rod

HIWIN Linear Guideways

Linear Guide Rail